The “pulling nut” is an accessory of
clutch type pull setter ; fherefore,
Please select
the right pulling nut for it.
|
Specification
for usage :
|
The pulling nut between M3 to M10 can be
used by this tool.
External adjustment for torque is easy to
be done, No tool is required.
If a user pulls a pulling nut with larger
size in advance, this user only
needs to rotate the torque adjusting cap
clockwisely. While a user
pulls a pulling nut with smaller size in
advance, this user only needs
to rotate the torque adjusting cap
counter - clockwisely.
Please refer to the scales marked on the
body. Then, according to
the material of the pulling nut, adjust
it counter – clockwisedly.
Air inlet tube must be 3/8” ID. PRESSURE
100 PSI (7kg/cm²)
_S.jpg "Air Pull Setter,Air Pull Setter (For M3 -M4)-air sander,air saw,air file")
_S.jpg "Air Pull Setter,Air Pull Setter (For M5 - M6)-air staplers,air riveters,air pneumatic tools")
_S.jpg "Air Pull Setter,Air Pull Setter (For M8 - M10)-air wrench,Air spray gun,air screwdrivers")
_S.jpg "Air Pull Setter,Air Pull Setter (For M8 - M10)-air sander,air saw,air file")
_S.jpg "Air Pull Setter,Air Pull Setter (For M3 -M4)-air wrench,Air spray gun,air screwdrivers")
_S.jpg "Air Pull Setter,Air Pull Setter (For M5 - M6)-air staplers,air riveters,air pneumatic tools")
_S.jpg "Air Pull Setter,Air Pull Setter (For M8 - M10)-air sander,air saw,air file")
_S.jpg "Air Pull Setter,Air Pull Setter (For M8 - M10)-air staplers,air riveters,air pneumatic tools")
_S.jpg "Air Pull Setter,Air Pull Setter - High Duty (For M12)-air wrench,Air spray gun,air screwdrivers")
